2″ 50MM Ratchet Tie Down Strap with D Delta Ring
Name: | 2″ 50MM Ratchet Tie Down Strap with D Delta Ring |
Model Number: | JLRS002-12 |
Width: | 50MM |
Length: | 6-12M |
Load Capacity: | 2500daN |
Breaking Strength: | 5000daN |
Surface: | Zinc plated/Electrophoretic black |
Color: | Yellow/Blue/Gray/Black/Green/Red |
Handle: | Aluminum/Plastic/Rubber/Finger lineAluminum/Plastic/Rubber/Finger lineAluminum/Plastic/Rubber/Finger lineAluminum/Plastic/Rubber/Finger lineAluminum/Plastic/Rubber/Finger line |
Hook type: | Delta ring |
Inquiry |
Product Description
Ratchet tie down strap also known as cargo lashing belt, are available in large variety of configurations of different sizes, colors, ratchet buckles and end fittings. Used mostly for motorcycle, estate car, flatbed trailer, van, truck, curtain side vehicle and container. The basic principle is to make the webbing by ratchet and pawl movement. It is gradually wound on the half-moon key of the hand puller, so that the cargo on the truck will be tightly bundled to achieve the purpose of safe transportation. Suitable for road, railway, sea, air transportation. Made from 100% polyester with high strength, low elongation, UV resistant. In temperature -40℃ to +100℃, it’s essential,flexible in operation tool to keep cargo safe.
Advantage: Sample available(To check quality), Customized design(logo printing, special fittings), Different packaging(Shrink, Blister, Polybag, Carton), Short lead time, Multiple payment method(T/T, LC, Paypal, Alipay).
Specification:
Model Number: JLRS002-12
Ideal for general haulage & distribution, for securing medium / heavy loads on flat bed, dropside, curtain side vehicle, containers and trailers.
2-Part System, comprising ratchet with fixed end plus main tension (adjustable) strap, both terminating in delta ring.
Working Load Limit:2500daN
Assembly Breaking Strength:5000daN
Standard Tension Force (STF) 350daN (kg) – using a Standard Hand Force (SHF) of 50daN (kg)
1′ fixed end (tail), fitted with a Long Wide Handle Ratchet
Manufactured and labelled in accordance with WSTDA-T-1 or EN12195-2
Other sizes manufactured to order.
Wear sleeves or corner protectors are recommended to protect the webbing straps.
Consider using with friction mats to increase the friction coefficient between the load and the vehicle floor.
Cautions:
Never use lashing strap for lifting.
Never use overload.
Do not twist webbing.
Protect the webbing from sharp or abrasive edges.
Periodic inspect the ratchet strap to ensure the tie down or webbing in good condition, or replace it at once.
Applications:
Process & Packing: